Merits are;

1. rapid to harden, able to open to traffic in 30-120 minutes.
   (the time for hardening can be adjustable at sites)
2. harden at the temperature of even 30°C below freezing point.
3. As it is excellent at flexibility, it is able to accommodate the deformation of existing road surface.
4. excellent at raveling resistance, weathering resistance, chemicals resistance and workability.

• Clean the surface to be treated and remove dusts.
• When the surface is wet, dry it completely by propane burner or so.

• In order not to make dirty the non treated surfaces and to rectify the shape of treating area, mask the non treated surfaces with gum tapes or so.

• In order to secure the adhesivity between treated surface and W-Taper, paint primer (0.3-0.5 kg/m²)

• Weigh the aggregates and binder resin so as to meet the specified ratio of mixing and mix them by mortar mixer until they are uniformly mixed.

• Spread W-Taper, compatct using tamper or so and finish using trowel or so.

• Remove the masking tapes and cure until W-Taper is hardened (about 40-60 minutes)