Slip Form Paver

	Main Specification Total length 7,000 mm Total height 2,700 mm Total weight 10 - 20 ton (varies by paving width) Laying Depth 5 - 30 cm Paving Width 2 - 6 m adjustable by pitch of 0.25 m Engine 155 Hp/2,400 rpm Running Speed 0 - 4.5 m/min during Paving Vibrator Variable cycles electric driven

The Features are;

• As it paves sliding attached forms, no works of setting up forms beforehand and removing them afterward is needed.
• As laying, compaction and smooth finishing are done by one machine, it requires fewer machines as compared to conventional set form type of paving.
• As the machine steers by itself and has automatic height control unit, high accuracy of construction is achieved.
• As it has electric driven vibrators, it can compact the concrete as tight as method of paving done by conventional equipment.
• As the paving depth can be as thin as 5 cm, it is applicable to Thin Layer Overlay as rehabilitation method of existing concrete pavement.
• It is also applicable for conventional set form type of paving.
• By attaching special attachment, it can construct other type of concrete structures such as concrete barriers.

Applicable to Structures described below

• Concrete Pavement : ordinary roads, agricultural roads, piers of harbors, apron of airport, yards in factories
• Ditches : site constructed U and V shape ditches
• Barriers : site constructed center barriers

Configuration of Construction Machines

• In case of no laying of steel mesh (1 layer laying and 1 layer compaction)
  
• In case of laying steel mesh (2 layers laying and 1 layer compaction)